I got tired of the individual boards shifting and sliding inside my game box, but the boards were too big to create a tuckbox for them. So, I developed these "caps" to go on either end of the stack of boards before placing them in the box. Print out the two caps and cut along all the outer solid lines, and between the smaller sections to the left and right of the printout. Fold along all the remaining solid lines, and fold the ends together as shown on the printouts. Tuck the caps on two opposite ends of the stacked boards, and place in the section in the box insert for the boards. Voila! Now they won't slide all over tarnation inside the box.

This is a one-page document with two tuckboxes, one for the Quest tiles, and one for the Nameless tiles, just so they don't slide all over the place inside the box. These were created using the tuckbox generator at http://tuckboxes.gameupdates.com and images available here at BGG.